Canon IR5000 Close Front Door

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tim C
    Trusted Tech

    100+ Posts
    • Apr 2008
    • 167
    #1

    Canon IR5000 Close Front Door

    I have this IR5000 that keeps coming up with the message "Close Front Door" only after its turned off and back on. You open and close the door and it clears the message, runs copys fine until you turn it off again. Checked all the interlock switches, OK...
    Tags: area, back, canon, canon ir5000, check, close, door, driver, duplex, fine, front, horizontal, ir500, ir5000, message, motor, nec, off, open, pcb, ratio, rear, registration, switches, terminal
    • SCREWTAPE
      East Coast Imaging

      Site Contributor
      2,500+ Posts
      • Jan 2009
      • 3396
      #2
      Look around the duplex area, check the rear terminal female and male connectors
      Check Duplex Horizontal Registration Motor M16 and Duplex Driver PCB as well.

        Comment

        • skkn
          #3
          Originally posted by SCREWTAPE
          Look around the duplex area, check the rear terminal female and male connectors
          Check Duplex Horizontal Registration Motor M16 and Duplex Driver PCB as well.
          I have Problem like this
          So, Please explain more detials

            Comment

            Previous template Next
            Working...