Micro soft office 2010

[Peter Sim]

Hai all, need info for iR3300 driver ,can it support the micro soft office 2010?

Thank you

[bnmand]

I think it should work.

I should be able to download Office 2010 in a month or two (after it becomes available to Retail as I'm using the free upgrade from recent 2007 purchase) and then I'll give it a try.

I know it works with Office 2007.

[SCREWTAPE]

I don't see why not.

[D_L_P]

I agree. I don't think Office 2007 to 2010 is that great of a leap. Win XP to Win 7 on the other hand.......

Do you know which driver you plan to use? For MS Office I'd stick with PCL6 or PCL5e. I typically don't recommend the PCL6 driver but for your situation with an older copier and the newest version of Office I think I'd try the PCL6 1st. As long as the test page prints OK you should be fine, meaning it will print at all, the flag is there and you see your version of windows next to it.

[Peter Sim]

Thank you everyone for your suggestion and info.

[teckat]

Knowledge runs amok in here

im..jpg

[mrfixit51]

I agree with the pack,,, your ability to print is tied to the driver, not the application!