ir6000 E000002-0000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • exCSER
    Technician

    50+ Posts
    • Mar 2009
    • 98

    ir6000 E000002-0000

    Hi gang,
    A friend asked me if I could fix this, but I don't have a manual. Can anyone tell me what this code means? Thanks in advance!!!
  • D_L_P
    Self Employed

    1,000+ Posts
    • Oct 2009
    • 1196

    #2
    E002 is the fuser did not reach 100 degrees.

    Enter service mode then go copier-> function->clear->err. Hit ok and switch off/on at main power switch, the one on the right rear.

    Comment

    • SCREWTAPE
      East Coast Imaging

      Site Contributor
      2,500+ Posts
      • Jan 2009
      • 3396

      #3
      Check your thermistors as well, there probably dirty.
      If the code does not go away, then replace them.

      Comment

      Working...