If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have a 1023n I want to add fax to. I have a 1023if that was dropped, Can I use the fax out of the IF in the N machine and just change the necessary parts?
Thanks
I have a 1023n I want to add fax to. I have a 1023if that was dropped, Can I use the fax out of the IF in the N machine and just change the necessary parts?
Thanks
There is no fax option in the service guide, and only the iF model has fax in it. I do not know if the parts can simply be moved from the N to the iF model. You are free to try anything you want, but I don't know what your results will be.
"Once a King, always a King, but once a Knight is enough!"
well i swapped the parts and it was relatively easy, All the buttons work, the fax button lights up but no dial tone, it never dials. Firmware maybe?
There is no different system software for the 3 models, they all use the same version... it would not hurt to try, maybe in the loading it would "discover" the fax parts, like I mentioned earlier, I have no way to predict the outcome here, you are the one pioneering this!
"Once a King, always a King, but once a Knight is enough!"
Yep I made sure everything is plugged in and it visually looks Identical to a IF model.
weird, Im going to check it out further, I'll let you know if I find something out.
Thanks Guys
Comment