iR3570 0108 JamFest

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • extech
    • Sep 2024

    [Jamming] iR3570 0108 JamFest

    Thanks to all those who responded to my inquiry regarding the 3570. I saved the Senior Vice President bigg bux with the innovative idea I got from y'all. I got a roll of window seal tape from Lowe's for $2.67 and replaced the guide pads on the lower right door and the pads on the paper guide that always falls off when splitting the right door for removal. Those dudes were sacked down to about .020" thick. IT HAS NOT JAMMED SINCE!!! Thanks for all the help. I am a guitar builder/repairman. Anybody needs that kind of work or help with it, anything I can do, holler (axeman@basicisp.net) This will probably be my last post. Thanks for everything.
  • SCREWTAPE
    East Coast Imaging

    Site Contributor
    2,500+ Posts
    • Jan 2009
    • 3396

    #2
    Well that's a shame, this will be your last post.

    I doubt it.. LOL

    but gald you found a solution for your littile jamming issue.


    Take care.
    Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC

    Comment

    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16092

      #3
      Originally posted by extech
      Thanks to all those who responded to my inquiry regarding the 3570. I saved the Senior Vice President bigg bux with the innovative idea I got from y'all. I got a roll of window seal tape from Lowe's for $2.67 and replaced the guide pads on the lower right door and the pads on the paper guide that always falls off when splitting the right door for removal. Those dudes were sacked down to about .020" thick. IT HAS NOT JAMMED SINCE!!! Thanks for all the help. I am a guitar builder/repairman. Anybody needs that kind of work or help with it, anything I can do, holler (axeman@basicisp.net) This will probably be my last post. Thanks for everything.
      elvis..jpg

      Elvis Has Left the Building
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

      Comment

      Working...