If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Need help, what is the problem to do with this code in IR105 010B...Registration also Run Out, "
1st page very left, 2nd page very right...."
delay jam to the Inside Delivery Sensor PS9. can be caused by a broken 52T gear found on the upper fuser roller
Check the Paper Pickup Drive Assembly, or the Pickup Motor M2. A malfunction in this area, such as M2 running slow may cause a registration problem and possibly an 010B jam code.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Definately sounds like a paper movement issue. Check the registration clutch and clutch housing. make sure the housing isn't broken and the clutch is in good shape. Try cleaning it.
Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it.
Definately sounds like a paper movement issue. Check the registration clutch and clutch housing. make sure the housing isn't broken and the clutch is in good shape. Try cleaning it.
definitely...especially if wandering registration. If you were getting delay jams at reg or prereg sensor maybe pickup motor...doubt it though...lead edge reg is determined by clutch off/on....turned on by signal from reg sensor. The housings break and the clutch is not anchored properly
Comment