IR 7095 Error Code E000004-0001

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jmandassociates
    Trusted Tech
    100+ Posts
    • Sep 2008
    • 181
    #1

    [Error Code] IR 7095 Error Code E000004-0001

    IR 7095 has some kind of power problem. Even if I am in the service menu, it will shut itself down after a few minutes. Also when I was in the service menu, I noticed that at least half of the menu buttons were missing. Anyone know why service menu buttons would disappear like that? I believe the error code is a SSR Short Circuit. Not sure how to fix this. Thanks in advance for any advice.
    Tags: 7095, advance, advice, burnt, circuit, code, disappear, down, e00, e000, e0000, error, error code, even, good, half, heater, missing, power, power supply, problem, replace, service, service menu, short, shut
    • 20YRSEXP
      Trusted Tech
      250+ Posts
      • Oct 2008
      • 281
      #2
      Check the heater lamp replace if it is no good or Replace the SSR, which I believe is part of the power supply PCB.
      Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it.

        Comment

        • teckat
          Field Supervisor
          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16092
          #3
          Originally posted by jmandassociates
          IR 7095 has some kind of power problem. Even if I am in the service menu, it will shut itself down after a few minutes. Also when I was in the service menu, I noticed that at least half of the menu buttons were missing. Anyone know why service menu buttons would disappear like that? I believe the error code is a SSR Short Circuit. Not sure how to fix this. Thanks in advance for any advice.


          Check the Main Heater Lamp for burnt (black) ends indicating an arc or short.
          Replace the Main Heater Lamp; part number FH7-4719-000. Also check for damaged wiring to the Main Heater Lamp.

          Note: to clear the error perform (COPIER>FUNCTION>CLEAR>ERR).
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • jmandassociates
              Trusted Tech
              100+ Posts
              • Sep 2008
              • 181
              #4
              thanks guys, I will try this

                Comment

                Previous template Next
                Working...