[Misc] canon ir 6000

[Saji]

i have a canon ir 6000, when i make multiple sets from feeder, it just makes one set after that machine just keep rotating without printing.but if i make blank copies,it can make multiple sets, it dosent show any error codes, what could be the prob, plz help, thanks in advance

[SCREWTAPE]

Maybe you need a new machine!

[D_L_P]

Reseat the RAM on the main controller.

[teckat]

Reseat the RAM on the main controller.

be careful what u say about opening the back of machines/ confirm it is a tech n' not end user
Image16..jpg

[songela]

Perhaps you need a friend to make the same fault readable!

[teckat]

Perhaps you need a friend to make the same fault readable!

Let's just stick to the issue at hand.
19260..jpg
Take your private thoughts n' post them in a PM to Orig. poster.

[Saji]

Thanks for the response, i already cleared Ram, but prob persists.any adivice?, thnaks

[teckat]

Thanks for the response, i already cleared Ram, but prob persists.any adivice?, thnaks

D_L_P Did Not post for u to Clear Ram/ The post reads RE SEAT MEMORY ON MAIN CONTROLLER

what did u CLEAR/ did u put back numbers from Print out

[Saji]

sorry,i mis understood, thank you for being kind to clarify it for my benifit,iwill do it and let u know.thanks

[Saji]

thank you

Reseat the RAM on the main controller.

I re seat the Ram and now the machines is ok..thank you verymuch.

[teckat]

D_L_P deserves the credit/ I only pointed it out

brainstorm..JPG

[D_L_P]

Glad to hear it is working.

Thanks for clarifying my post.