[Misc] imagePASS M2 on a ir8070?

[Guest]

Hello everyone!

I just purchased a used Canon ir8070, and the reseller is going to be installing an imagePASS M2 Fiery rip. The only brochure I could find online shows the M3. Will an M2 work?

Thanks!

[KenB]

The imagePASS M2, according to any Canon documentation I can find, will NOT work on an iR8070.

The imagePASS M3 is required.

I never tried putting an M2 on an 8070, but I sincerely doubt it would function.

[mpsinc]

Very interesting.......... I wonder why they are trying to do this then? It didn't come with a rip to begin with, and when I told them we needed one, this is what they came back with. I have a bad feeling this is a little bit over their head.

I guess I'll find out tomorrow (but based on prior history, probably a few more days). I'll post the outcome!

[SCREWTAPE]

The M3 is required.

I would let the seller know if I was you.

[teckat]

Very interesting.......... I wonder why they are trying to do this then? It didn't come with a rip to begin with, and when I told them we needed one, this is what they came back with. I have a bad feeling this is a little bit over their head.

I guess I'll find out tomorrow (but based on prior history, probably a few more days). I'll post the outcome!

iR8070-Server..jpg
iR8070 Server
The Canon imagePASS-M3 Print Controller* i

iR8070 Uses>the M3 ONLY~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~:)


Canon ImagePass M2 Print Controller is for the>Canon IR 105, IR7200, 8500, 5020, 6020