canon image runner advanced 9070c

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • canonclc
    Technician

    50+ Posts
    • Apr 2010
    • 71
    #1

    [Dead] canon image runner advanced 9070c

    hi installed a ira 9070 with several finishing options,it was working fine for 30 minuites, tried to do a ring binder test then there was a pop and now its dead due to the ring mains tripping out. going back on monday after the sparky has been in to reset the trip.does the machine need to be on 3 phase ?
    Tags: 5151, 901, 9070, advanced, back, binder, black, canon, clc, color, dead, est, fine, finishing, image, image runner, installed, options, phase, reset, run, runner, stalled, test
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16092
      #2
      Originally posted by canonclc
      hi installed a ira 9070 with several finishing options,it was working fine for 30 minuites, tried to do a ring binder test then there was a pop and now its dead due to the ring mains tripping out. going back on monday after the sparky has been in to reset the trip.does the machine need to be on 3 phase ?

      I hope u followed the Canon installation procedure for this model/ if u did not/sorry but u will have issues/ back track your options installs
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • SCREWTAPE
          East Coast Imaging

          Site Contributor
          2,500+ Posts
          • Jan 2009
          • 3396
          #3
          Ouch!

          Hope your Canon authorized trained.

            Comment

            • canonclc
              Technician

              50+ Posts
              • Apr 2010
              • 71
              #4
              Yes I'm canon trained,followed the instructions to the letter on install.sparkey put the mains back on and all was well . Spent the Whole day testing the m/c with the user and all was ok.so no need to buy a new interview suit just yet

                Comment

                • teckat
                  Field Supervisor

                  Site Contributor
                  10,000+ Posts
                  • Jan 2010
                  • 16092
                  #5
                  Head duh..jpg
                  **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                    Comment

                    Previous template Next
                    Working...