I have an IR 6000 parts machine. Just out of curiosity ----- can the entire fixing feeder drawer assy be removed and slid into an IR 5000 or is the wiring on the whole assy different. Thanks in advance for your replies.
-
sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com -
I don't see a problem. Its the same to me.
Try it!Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLC -
will do - thanks for replying amigo........... I can't imagine that they are different but I've been surprised B4sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.comComment
-
They are completely the same, fuser hardware-wise..."Once a King, always a King, but once a Knight is enough!"
Comment
-
Its the wiring to the big connector on the back that worries me ... I know all the parts are the same and it will fit into the machine just fine. I'll try it today and let you all know. Thanks again to you guys. You're always prompt in responding.sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.comComment
-
The differences in the 5000 and 6000 family are in the controller cage."Once a King, always a King, but once a Knight is enough!"
Comment
-
Thanks MRFixITsigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.comComment
-
Its the same all the way.
The part number is the same for 5000/6000 - FIXING/FEEDER FRAME ASSEMBLY--FG6-5086-290.
And the fuser is the same. Same part number - FIXING ASSEMBLY--FG6-5084-000Canon Copier Repair Service. Sales, Parts & Toner. NYC/NJ area. Contact:East Coast Imaging Solutions,LLCComment
-
shoes..JPG
so will the Fuser~~~~~~~~~~~~~~~~~**Knowledge is time consuming, exhausting and costly for a trained Tech.**Comment
-
You should have no trouble taking the whole assy. As was previously posted, all the programming & speed differences are on the DC controller, not in the RDF. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
To close this thread - thanks very much to all who replied....and yes they are identical !sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.comComment
-
extra-715605..jpg
Read all about ~~~~~~~~~~~~**Knowledge is time consuming, exhausting and costly for a trained Tech.**Comment
Comment