IR 3300 blury image on ADf

[rbrendemihl]

When i print using the ADF i get a wavy line on the first and last inch on the top of the copy. Toward the back of the copier.

[blazebusiness]

Try adjusting the height of the DADF. If it was happening from the DADF and the glass the ccd could also be a candidate. Post an example of this problem if the height adjusment doesn't resolve issue.

[rbrendemihl]

Wavy copies

What I found was the platen roller bushings were gummed up and the platen roller was not dropping down properly.

Thanks for your help.

Ron

[blazebusiness]

My pleasure to help. Come to think of it...we had a DADF with those bushings gummed up about 6 monthes ago too. Glad that its fixed .