IR2270 2 sided

[Brian8506]

Machine always scans for 2 sided copies but 2 sided is not selected. I think there may be a setting somewhere that needs to be defaulted. TIA

[teckat]

Machine always scans for 2 sided copies but 2 sided is not selected. I think there may be a setting somewhere that needs to be defaulted. TIA

enter service mode level 2 > COPIER > OPTION > BODY ><SCANSLCT set to "0">.

If the setting is "1" the feeder will scan the original twice. Set to "0" for single scanning.

[SCREWTAPE]

Machine always scans for 2 sided copies but 2 sided is not selected. I think there may be a setting somewhere that needs to be defaulted. TIA

When you mean scanning 2 sided.

Do you mean scanning as scanning to a file folder or;

When your just making copies?

If its when you copy.

Try initializing your copy or common settings.

[teckat]

SCREWTAPE/ i think poster means scanner moves twice on same doc/ not a reverse pic up from try/

if it's just for scanner moving twice under same doc/ that level 2 fix will work for single scan set up

[SCREWTAPE]

SCREWTAPE/ i think poster means scanner moves twice on same doc/ not a reverse pic up from try/

if it's just for scanner moving twice under same doc/ that level 2 fix will work for single scan set up

UMM.

[Brian8506]

Techkat got it thanks I dont know why it was set to 1 but 0 makes it scan one side unless 2 sided is chosen on copying

[teckat]

HatTip_2..jpg

Your Welcome~~~~~~~~~~~~~~~~~~