iRC3380i install new drum units

[Alan Aya]

Dear Fellows Tech,
Need some advice on changing new drum for iRC3380i. After i replaced the new drum units, what are the steps/procedure i need to do? Please advice.

Thank you

[blazebusiness]

You asked what do you do after you replace the drum -Not much -The machine should detect the new drum unit when you close the front door or turn on main power and blows its fuse. Then it resets drum counter to zero.
Important that you know how to open up the unit to replace the drums. The factory service manual on page 2-4 details dissassembly and install procedure. Make sure you review that before installing drums.
I personally like to turn off power before I replace a drum and turn on copier after the install is complete. Hope this helps.

Also see the following posts & read comments by Mrfixit & teckat

http://www.copytechnet.com/forums/canon/31994-irc-3380-replacing-drum-cartridge.html

http://www.copytechnet.com/forums/canon/31930-change-drum-irc2880.html

Probably the most helpful thing is ------Go see that youtube video!!!!!!

Its Great!

[SCREWTAPE]

Nice preview blaze.

Even a user can change a drum.

[blazebusiness]

thanks!

[OoIANoO]

after installing new drums on irc2880 series

Dear Fellows Tech,
Need some advice on changing new drum for iRC3380i. After i replaced the new drum units, what are the steps/procedure i need to do? Please advice.

Thank you

Dont forget to do 'Auto Gradation' after new drums fitted. you should do it 1st with 'pascal' off and the repeat when 'pascal' is back on.