i am facing the problem with conon ir-105 i am a local technician but fan or fixing lampss on. no green light is not on and red is not working no screen no display but see in the disply dime light is on but ani buttn is noy work. ani body help me .thank you,
canon ir-105 on problem
Collapse
X
-
-
October 3, 2003 Product : imageRUNNER 7200 / 8500 / 85 / 105 Title : No power and no green light on the control panel Problem :
No power, blank LCD display, and no Main Power Indicator light on the control panel. AC voltage is going into the All Day Power Supply PCB at connector J781. 9 volts DC at connector J783 pin 1 on the All Day Power Supply PCB is not present.
Note: connector J783 pin 1 is 9 volts DC on an operating machine and not 12 volts DC as indicated on the General Circuit Diagram. Also note that on the General Circuit Diagram the All Day Power Supply PCB is referred to as the All Night PCB.
Solution :
In this example the 2 amp fuse on the All Day Power Supply was open and replacing the fuse corrected the problem.
Canon USA, Inc. Systems & Technical Support DivisionLast edited by teckat; 07-13-2010, 06:33 PM.**Knowledge is time consuming, exhausting and costly for a trained Tech.** -
Can you get a bigger picture I am having trouble making out some of the details. heheheIs the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it.Comment
-
**Knowledge is time consuming, exhausting and costly for a trained Tech.**Comment
-
**Knowledge is time consuming, exhausting and costly for a trained Tech.**Comment
-
It's a small PCB above the right hand corner of the relay PCBIs the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it.Comment
Comment