IR 400 Dead

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • abkonnet
    Trusted Tech
    • Mar 2008
    • 166
    #1

    [Dead] IR 400 Dead

    I have got error E604 in Ir 400 i remove the Flash Roms and place it, Then turn ON the machine. The machine doesn't turn ON only the power LED glows.
    Tags: 152, 2918, 400, check, controller, dead, display, e604, error, flash, fuse, image, low voltage, memory, net, pcb, power, power supply, processor, roller, server, supply, turn, voltage
    • teckat
      Field Supervisor
      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16092
      #2
      Originally posted by abkonnet
      I have got error E604 in Ir 400 i remove the Flash Roms and place it, Then turn ON the machine. The machine doesn't turn ON only the power LED glows.

      Check the Image Server Memory or the Image Processor PCB

      check Low Voltage Power Supply
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • rosaro75
          Technician
          Site Contributor
          50+ Posts
          • Mar 2009
          • 86
          #3
          check the fuse in image processor board if it blown. check display board . there is a screw fall on controller board in display board

            Comment

            Previous template Next
            Working...