COPY color when the plaintiff is aware that the adjustment mode when not.- Same color models -COPIER> ADJUST> MISC> ACS-ADJ entries -3 3 (-3 adjustable)
-
-
Plaintiff= do you mean The Customer ???
please explain / do u mean Auto Color Detection of Document on Glass / Copying_Scanning ???
This model is different than imageRunners when it comes to adjustments/ u need to be trained on imageRUNNER ADVANCE models or study the many manuals for it.
COPIER>ADJUST>MISC
ACS-ADJ Set criteria for B&W/color in ACS:front
Lv.1 Details To set the judgment level of B&W/color original in ACS mode.
As the value is increased, the original tends to be detected as
a B&W document, and as the value is decreased, the original
tends to be detected as a color document.
Use case When adjusting the color detection level in ACS mode
Adj/set/operate method
1) Enter the setting value (switch negative/positive by -/+ key)
and press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -3 to 3
Default value 0**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
Comment