CLC4000 Error Code E260-0002

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • phollawat Chaimoonchuen
    Technician

    50+ Posts
    • Dec 2007
    • 71
    #1

    [Error Code] CLC4000 Error Code E260-0002

    I have copier canon clc4000. Now it's show error code e260-0002. Somebody can help me.
    Tags: ages, canon, check, clc, clc4000, clc500, code, color, connections, controller, copier, dc controller, error, error code, fuses, help, j62, occur, pcb, power, power supply, show, supply, voltages, wrong
    • blazebusiness
      SanDiegoCopierRepair.com

      Site Contributor
      1,000+ Posts
      • Apr 2010
      • 1246
      #2
      Check the fuses or could also be power supply. Check your power supply voltages. I think that model also had issues with a connector on the hopper if you plugged in the wrong wire.
      sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16092
          #3
          Originally posted by phollawat Chaimoonchuen
          I have copier canon clc4000. Now it's show error code e260-0002. Somebody can help me.

          E260 0002 Error Code

          Check for 24 VDC at front door interlock SW1.
          Check 24 VDC outputs at DC Power Supply, Connector J5338 (pin 1 and 2), J5339 (pins 1, 3 and 4) and J5313 (pins 3, 5 and 6). Replace DC Power Supply, if missing any of the 24 VDC outputs.

          + check below



          Product : CLC3900/CLC3900+/CLC4000/CLC5000/CLC5000+/CLC5100 Title : E260 0002 Error :
          This error may occur after replacing either the machine side or hopper side connector J6217.

          Workaround :
          Two 7-pin connectors (one blue and one white) plug into either the machine side or hopper side connector J6217. If the blue and white connector are switched during connector replacement, fuse 5611 will blow on the dc fuse pcb. Fuse 5611 (5A) supplies 24v through connector J5610 to the dc controller connector J2221. See photos for proper connections:

          Last edited by teckat; 07-28-2010, 01:59 AM.
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • phollawat Chaimoonchuen
              Technician

              50+ Posts
              • Dec 2007
              • 71
              #4
              Thank you very much

                Comment

                Previous template Next
                Working...