Canon IR 2800 E602-0003

[Kurt]

I think this a hard drive problem but not sure. Thanks Kurt

[ladybird]

Correct - try reformat &reload software or replace & reload software

[rickr]

HDD

It is a hard drive problem.there are checks you can do but you are better off to just replace the hdd format and reload the system.if you get the hdd off you can google the manufacturer number and find a replacement for cheaper than getting it thru canon

[carlo canon minolta]

have you sorted this out
if not i can get you a hard drive and upload it
for you if needed.

thanks let me know

[WOETC]

iR2800 e 602 Error

yes that's a HDD error. If you cant get by with a reformat and Firmware update, you can sometimes stick the Drive in an external USB drive and reformat it all. If it doesn't work after as a copier drive it can still be useful for other storage purposes. Failing that there are local drivers for a range of Notebook HDD that you can use, though the range is pretty specific, you have to open up the local drive IFT file in wordpad to see if the drive you have is listed. Those drives are a damn site cheaper than the Genuine Canon item.

[wangchaoguis]

I think this a hard drive problem but not sure. Thanks Kurt

* 28* ,SYSTEM ,CHECK TYPE 1,2,3,4
CHECK HD
HD CLEAR

[pjdbm]

I am sure this is done already but just replace the hard drive, use a good one or it will fail again. Toshiba is the original but had them fail.

I went through three hard drives on one machine in a year.

[gstaples]

iR2800 Firmware

I purchased a Canon hard drive for a iR2800. It was mfg by Toshiba. The drive came with a CD-Rom with firmware for a iR2200 and the flash utility to install it. Is the firmware for the iR2200 and the iR2800 the same? If not, where can I get the firmware for the iR2800?

[ap0203621]

E602-003、IR 2200I hard disk、IR 2800I hard disk、IR 3300I hard disk、IR 3320I hard disk、

E602-003，，the only solve way is change the hard disk。The hard sisk form our company just need connect to the printer then can use，without any unconventionality，）。。

Our major disk:IR 2200I、IR 2800I、IR 3300I、IR 3320I、IR 5000I、IR 6000I、IR 8500I k，price as following：
Canon Model Basic ordonnance Price（RMB） +print (RMB) + ROM and network card(RMB)
IR 2200I hard disk+system 500 +100 +600
IR 2800I hard disk+system 500 +100 +600
IR 3300I hard disk+system 500 +100 +600
IR 3320I hard disk+system 800 +100 +600
IR 5000I hard disk+system 500 +100 +600
IR 6000I hard disk+system 600 +100 +600
IR 8500I hard disk+system 850 +100 +600

*Period of validity：all the year*
ADD:201, West block, Shang bu commecial building , Hua Qiang south road, Fu Tian district, Shenzhen China.
Tel:0755-81677725 83001919 Mr.Lin
QQ: 870530595 E-mail:zcdigi@hotmail.com

[Gleq]

E602-003，，the only solve way is change the hard disk。The hard sisk form our company just need connect to the printer then can use，without any unconventionality，）。。

Our major disk:IR 2200I、IR 2800I、IR 3300I、IR 3320I、IR 5000I、IR 6000I、IR 8500I k，price as following：
Canon Model Basic ordonnance Price（RMB） +print (RMB) + ROM and network card(RMB)
IR 2200I hard disk+system 500 +100 +600
IR 2800I hard disk+system 500 +100 +600
IR 3300I hard disk+system 500 +100 +600
IR 3320I hard disk+system 800 +100 +600
IR 5000I hard disk+system 500 +100 +600
IR 6000I hard disk+system 600 +100 +600
IR 8500I hard disk+system 850 +100 +600

*Period of validity：all the year*
ADD:201, West block, Shang bu commecial building , Hua Qiang south road, Fu Tian district, Shenzhen China.
Tel:0755-81677725 83001919 Mr.Lin
QQ: 870530595 E-mail:zcdigi@hotmail.com

Hi
I'm interested in your products
send me price list
Bootroms, harddisks, printer kits etc

my email: gleqventures@gmail.com

[ninja copy]

how am I will should do ?

i have HDD 80 Gb
Model iR3320
how am I will should do ?

[tuli]

the E 602- 003 is due to hard disk system error
but you can scan it ;run check disk its can fix that problem.
try this,

hold on 1 and 9 (from the machine key board) then switch on the copier;
then wait arround 1 hour all sceer will be white then the copier will display download mode.
then switch off and put on the copier.

[tuli]

I think this a hard drive problem but not sure. Thanks Kurt

the E 602- 003 is due to hard disk system error
but you can scan it ;run check disk its can fix that problem.
try this,

hold on 1 and 9 (from the machine key board) then switch on the copier;
then wait arround 1 hour all sceer will be white then the copier will display download mode.
then switch off and put on the copier.