Canon W8400 stuck on 'Nozzel check'

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jonbonse
    Senior Tech
    Site Contributor
    500+ Posts
    • Jun 2009
    • 692
    #1

    Canon W8400 stuck on 'Nozzel check'

    Hi all

    I have a Canon W8400 that gets stuck on power up with: "offline - nozzle check"
    stays that way for hours.

    Can anyone help me get through this problem?

    Many thanks
    Tags: 400, canon, check, diagnose, help, hours, inspecting, nozzel, offline, power, print heads, problem, stuck, tech, w8400
    • blazebusiness
      SanDiegoCopierRepair.com
      Site Contributor
      1,000+ Posts
      • Apr 2010
      • 1246
      #2
      What steps have you taken to diagnose this problem? Are you experienced on this model? The nozzles are part of the printhead on Canon bubblejet printers. This model uses the BC-1350 printhead. I would start by inspecting/cleaning that part and or replacing it if you deem necessary.

      These units don't like to sit idle for long period of time---ink needs to regularly cycle thru printheads. Has this machine not been used for a while?
      sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

        Comment

        • costd
          Technician
          250+ Posts
          • Jan 2008
          • 409
          #3
          It is also possible that you need to replace both print heads (not cheap). If you are not a tech for this series, about all you could try is run both A and B cleanings several times, then run the nozzle check. If those do not fix the problem, call a tech - but odds are you will need new print heads.

            Comment

            Previous template Next
            Working...