Service Menu code for IR C3200

[dagoof]

Hello all,

New here but it seems like a great resource to get to know my new C3200 copier

Actually, it's the CLC3200 I have (I believe it's pretty much the same as the IR C3200) - I was just wondering how I can get into the service menu to check the drum life, as I'm getting a lot of yellow background toning and believe the drum might be on the way out (unless anyone has any other ideas?). I also ran a full gradation adjustment and cleaning cycle.

[djzolla]

u need to press *28*. under copier, display check the misc option. depends what kind of printing has been going on but if its 200 or above u might start having issues with that specific colour. in saying that im busily changing a drum now thats up to 440 weyhey is backround on copies and prints, if its just copies clean the optics. if its both sounds like your drum is knackered...change it

[dagoof]

Hi DJ,

Thanks - I'd seen the *28* code but that doesn't seem to do anything on my copier, I tried keying it in sequentially and also holding *+2+8 but it doesn't show anything different or a misc option. Is it maybe different code needed for the CLC?

[djzolla]

nope i work on em all the time. its definately *28* try pushing * then 2 and while holding down 2 then press eight then * again. theres no need to push at the same time. if this doesnt work push the yellow button on the control panel first then try again that sometimes helps

[dagoof]

Thanks Dj, I still can't seem to get this working for some reason!

I'm doing it from the Copy tab, hitting * once, holding 2, press 8, releasing 2/8 then pressing star again. Also tried in sequence *,2*8*,*. Tried all this pressing the yellow tab too

[djzolla]

is your control panel definately functioning properly. if u cant get in with the stuff uve tried then it seems something is up with the control panel or something. ive never come across this one unfortunately good luck i say

[rambo40]

Thanks Dj, I still can't seem to get this working for some reason!

I'm doing it from the Copy tab, hitting * once, holding 2, press 8, releasing 2/8 then pressing star again. Also tried in sequence *,2*8*,*. Tried all this pressing the yellow tab too

Hi,
Please try this way.press *,press 2 and 8 TOGETHER IE SAME TIME.Let go of 2 and 8 and press * again.Do not hold 2 and 8 for too long only a second or two.
Hope this helps.

[dagoof]

Thanks Rambo, but I just can't get this working for some reason!

All the other keys seem to function fine so I can't see why the * wouldn't be ok.

[rambo40]

Thanks Rambo, but I just can't get this working for some reason!

All the other keys seem to function fine so I can't see why the * wouldn't be ok.

Hi Dagoof,
By * I mean "Additional Functions",Which is a * inside an enclosure? sort of.Not the * on the number pad.Hope its more clear now.
Good luck

[dagoof]

Ahhhhhhhhh! That's it, got it now!

Thanks Rambo

[Bledar]

error printing fiery clc3200

i have a clc3200.
i have connected on network with a cross cable and it ping normal.
i have a problem because does not print.
any idea?

[Oze]

u need to press *28*. under copier, display check the misc option. depends what kind of printing has been going on but if its 200 or above u might start having issues with that specific colour. in saying that im busily changing a drum now thats up to 440 weyhey is backround on copies and prints, if its just copies clean the optics. if its both sounds like your drum is knackered...change it

I just changed a black drum that was @ 667%