urgent..healpe

[zaza]

dear technician l have a code E 244 in the canon 6028 , please tell me how a resolte this code or if have the pdf tech manual please send me that.my e-mail: mecanopharme@hotmail.fr...thank's

[peterepeat]

E244

Possibly composite power supply pcb, but try the front door switch first. Those units were always kind finicky from an electrical standpoint.

[zaza]

thank's..

I have done everything but nothing I need a pdf technical my e-mail : mecanopharme@hotmail.fr

[yourownfree]

to reinforce peterepeat
It has been found that replacing the front door switch can resolve the E244 code. Part # FG5-8045-000.
also
E244 is an error in connection of the ribbon cable on the DC controller PCB. It has been found that by reseating all 4 of the ribbon cables can resolve the E244. There are 3 on the left side and 1 on the right side. After reseating the ribbon cables and if E244 still occur, the DC Controller might have to be replaced. DC Controller (FM2-8263-000).