Canon copier IRC2880

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • willy brown
    • Feb 2025

    #1

    Canon copier IRC2880

    Hi all

    I set up this canon copier IR C2880, on the net work i can ping it, loaded the driver on the pc but I can not print. when I go to the printer log I can see what i have sent. what must I do to make the machine print.

    Thanks

    Will Brown
  • Copier_Guy
    Senior Tech

    500+ Posts
    • May 2007
    • 543

    #2
    Originally posted by willy brown
    Hi all

    I set up this canon copier IR C2880, on the net work i can ping it, loaded the driver on the pc but I can not print. when I go to the printer log I can see what i have sent. what must I do to make the machine print.

    Thanks

    Will Brown
    You have to make sure the machine is a printer and not just a copier. You have to go into Service Mode and check the Boot ROM version. If it ends with a "C", the machine is not a printer. If it ends with an "N", the machine is a printer and you can move on to your next step of troubleshooting.

    Comment

    • willy brown

      #3
      Originally posted by Copier_Guy
      You have to make sure the machine is a printer and not just a copier. You have to go into Service Mode and check the Boot ROM version. If it ends with a "C", the machine is not a printer. If it ends with an "N", the machine is a printer and you can move on to your next step of troubleshooting.



      Thanks copier Guy. yes it is with the N all i have done even the access certificate from canon I put in that nunber

      Comment

      • songela
        Trusted Tech

        Site Contributor
        100+ Posts
        • Mar 2008
        • 216

        #4
        Check for permissions, i.e. make sure there are no restrictions in the additional functions menu,
        Regards

        Comment

        • peterepeat
          Technician

          50+ Posts
          • Apr 2008
          • 84

          #5
          You may want to make sure you don't have a duplicate IP address. Unplug the ethernet cable from the copier and ping it again.
          Also check the firmware versions in Service Mode - make sure the print is listed. The license may not have entered or taken properly.

          Comment

          • sjnordberg
            Technician
            • Jan 2008
            • 14

            #6
            Check the driver

            I believe the 2880 comes standard with UFR II printing, make sure you installed this driver and not the PCL or PS unless you purchased those options.

            Comment

            Working...