ir 600 adf jam

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jrivera
    • Mar 2025

    #1

    ir 600 adf jam

    I have a adf that is jamming at p1-13 senor,original delivery paper detection. i ran a sensor test and all indications show its working, i even replaced the sensor but still have the same jam code j-81. Any idea's will be helpful thanks.
  • BLITZKREAGG

    #2
    it sounds like your white belt drive is slipping or they are getting caught bup on the glass

    Comment

    • eherrera1004
      Junior Member
      • Sep 2008
      • 8

      #3
      about J81

      please, check the arm actuator of the exit paper, the side right there is a sensor with the actuator.

      Comment

      • OtherTech
        Technician

        50+ Posts
        • Aug 2007
        • 94

        #4
        Are the pickup rollers going up and down properly? The wiring attached to the front frame breaks inside the insulation(under the large black cover over the pickup rollers)

        Comment

        • eherrera1004
          Junior Member
          • Sep 2008
          • 8

          #5

          Comment

          • yourownfree
            Trusted Tech

            250+ Posts
            • Dec 2007
            • 474

            #6
            perform sensor init in service mode

            Comment

            Working...