HP CP3525n getting 59.F0

[mandongo]

Re: HP CP3525n getting 59.F0

[moreroman]

Re: HP CP3525n getting 59.F0

CP3525 Tear-down to 59.F0 solenoid replacement - YouTube

[moreroman]

Re: HP CP3525n getting 59.F0

se queda pegado el solenoide, nada tiene que ver la itb y el fusor

[mucinhanoi365.com]

Re: HP CP3525n getting 59.F0

Hey all, new here and looking for advice on our cp3525n printer, this just started getting this error message. Upon some searching it was caused from transfer kit needing replaced. So we replaced same thing, next was the fuser, same issue???? It starts to boot ok but then hear quick grinding from right side of fuser area... Any ideas Thanks!!!!!

hi, you check the role controls belt
DSC_1511.JPG

[Lance15]

Re: HP CP3525n getting 59.F0

I get SOOOOOOOOOOO lucky with a customer that has a bunch of the CP4525's that have been slowly coding this error and they want them fixed. Lucky me! Got ANOTHER one sitting behind me that I gotta fix over the weekend.

[Wild Bill]

Re: HP CP3525n getting 59.F0

HP CLJ CP4525dn Error 59.fo intermittent

[beaumontron]

Hey all, new here and looking for advice on our cp3525n printer, this just started getting this error message. Upon some searching it was caused from transfer kit needing replaced. So we replaced same thing, next was the fuser, same issue???? It starts to boot ok but then hear quick grinding from right side of fuser area... Any ideas Thanks!!!!!