HP LaserJet M608 Tray 1 Disable

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • blackcat4866
    replied
    Re: HP LaserJet M608 Tray 1 Disable

    If there are shipping screw locations, you could conceivable re-install the shipping screws. Or MacGuyver something to that effect. =^..^=

    Leave a comment:


  • GIUBOSS
    replied
    Re: HP LaserJet M608 Tray 1 Disable

    take away the paper sensor ... ;-))

    Leave a comment:


  • Madnhain
    started a topic HP LaserJet M608 Tray 1 Disable

    HP LaserJet M608 Tray 1 Disable

    Is it possible to completely disable Tray 1?

    I've googled this and all I get are HP Reps skirting the question offering workarounds (with drivers etc.)

    I've got this M608 that sits near the floor at a nurses station. Some of the nurses like to print from Tray 1 for some reason and they leave the tray out. Other nurses walk by and trip over it. I've fixed it 3 times and had to completely replace it once. There is NO reason for them to even be using Tray 1. I'm ready to remove the front cover / Tray 1 assy all together and be done with it.

    *edit* I've searched the onboard menus, and the web interface for tray settings, but all I can find are settings to change the size/type of media.
Working...