Re: Laserjet 3800 jamming continuously on 2nd page from paper tray.
That's what I was thinking about. Does the actual physical paper size match the size detected, or programmed? A mismatch is the most common explanation for this sort of jamming. =^..^=
Laserjet 3800 jamming continuously on 2nd page from paper tray.
Collapse
X
-
Re: Laserjet 3800 jamming continuously on 2nd page from paper tray.
Having this ongoing issue for a couple of weeks now, 1st page feeds ok but second page does not even get picked up most times and of course it registers a jam. On occasions the 2nd page feeds through by about 30cm (6in). Fuser and feed tyres, reg roller all in good condition with plenty of life on them. Help would be welcome. TIA.
paper size setting.. maybe!Leave a comment:
-
-
Re: Laserjet 3800 jamming continuously on 2nd page from paper tray.
Having this ongoing issue for a couple of weeks now, 1st page feeds ok but second page does not even get picked up most times and of course it registers a jam. On occasions the 2nd page feeds through by about 30cm (6in). Fuser and feed tyres, reg roller all in good condition with plenty of life on them. Help would be welcome. TIA.Leave a comment:
-
Re: Laserjet 3800 jamming continuously on 2nd page from paper tray.
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.comLeave a comment:
-
Laserjet 3800 jamming continuously on 2nd page from paper tray.
Having this ongoing issue for a couple of weeks now, 1st page feeds ok but second page does not even get picked up most times and of course it registers a jam. On occasions the 2nd page feeds through by about 30cm (6in). Fuser and feed tyres, reg roller all in good condition with plenty of life on them. Help would be welcome. TIA.Tags: None
Leave a comment: