Hi All,
I have a few CM3530 with Safecom installed. The problem is after some time the Safecom solution will start to give many kinds of problems. This will usually force me to change a new HDD to resolve the issue (after a few times of COLD RESET and DISK INIT that only works for a few days). With a new HDD, the printer will work normally with Safecom installed.
WIth question is, rather than buying the replacement HDD from HP store (which is expensive) can I just use any type of SATA disk with the same storage capacity for replacement.
Thanks
I have a few CM3530 with Safecom installed. The problem is after some time the Safecom solution will start to give many kinds of problems. This will usually force me to change a new HDD to resolve the issue (after a few times of COLD RESET and DISK INIT that only works for a few days). With a new HDD, the printer will work normally with Safecom installed.
WIth question is, rather than buying the replacement HDD from HP store (which is expensive) can I just use any type of SATA disk with the same storage capacity for replacement.
Thanks