Greetings fellow technicians,
Having Problems with the service station on "boot" up tbe carriage drives to the left as normal, and the service station starts up to "home" but the service station is driving the new maint. Kit forward to the point of knocking the cover door open and driving it all the way off the track, I found nothing in the service manual that could help determin if there is a timing adjustment, sensor problem? , drive gear problem ?
The plotter has a new ink tube assy installed and the primer printhead nozzles are installed ready to go, but because of the new maint.Kit problem at boot up, I cant get to any point further.
Please any help with this would be greatly appreciated, I can call you if thats easier.
Really need help with this one.
Thank you.
Having Problems with the service station on "boot" up tbe carriage drives to the left as normal, and the service station starts up to "home" but the service station is driving the new maint. Kit forward to the point of knocking the cover door open and driving it all the way off the track, I found nothing in the service manual that could help determin if there is a timing adjustment, sensor problem? , drive gear problem ?
The plotter has a new ink tube assy installed and the primer printhead nozzles are installed ready to go, but because of the new maint.Kit problem at boot up, I cant get to any point further.
Please any help with this would be greatly appreciated, I can call you if thats easier.
Really need help with this one.
Thank you.