[CQ] CP5225 Non duplex - parts required to make it one.

[Gus633]

As headline says,have a basic cp5225 would like to turn it into a duplex. Have all the part numbers,just wondering if anyone has tried to do this? And offer any help/advise.
One strange thing,when I connected it to my computer it continually
says that it is a 'dn' printer!? I'll try a duplex and see what happens.
Cheers in advance.

[Gus633]

Re: CP5225 Non duplex - parts required to make it one.

As headline says,have a basic cp5225 would like to turn it into a duplex. Have all the part numbers,just wondering if anyone has tried to do this? And offer any help/advise.
One strange thing,when I connected it to my computer it continually
says that it is a 'dn' printer!? I'll try a duplex and see what happens.
Cheers in advance.

Well you can forget about this one.....after sorting out the laptop printer ports.....(Don't ask!) Finally managed to get the
5225 as the default printer (Don't you just love Window's)
Set the printer as colour (Wasn't set in the driver,set to duplex and flip page over to print on both sides)
Tried a duplex and blow me down if it went and duplexed! Strange as according to the guy I bought it off it was the base model. Perhaps he just never set up the driver properly? Still I thought it was strange when it installed itself as a
CP5225dn printer.

So I don't have to mess with this one,other than a good clean!

Cheer's all.