HP CM2320 FXI Paper not feeding.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gus633
    Technician
    • Jun 2015
    • 43

    #1

    [Jamming] HP CM2320 FXI Paper not feeding.

    Hi guy's,
    recently acquired a CM2320 FXI MFP with a not feeding paper issue.
    Can't prove as yet,toners haven't arrived and there's no component test and you can't do anything until there fitted-nice!

    If you check out the photo's highlighted with a red arrow you'll see a spring that seems to be doing nothing.
    There's a spring loaded two plate affair that gets linked to the rear door and on the bottom one,top right hand side is what look like a place for a spring to be fitted.

    The spring that's not attached to anything-is this meant to be attached to the top spring loaded plate marked with the number RC2-3550? For there is a square like peg that the spring may or may not attach to?

    If anyone has the same or similar printer,can you post a couple of photo's as to what it should look like.
    Service manual is pretty sketchy when it comes to these parts.In fact it doesn't even mention removing/servicing it except for the pickup roll and pad.

    Cheer's for any help!

    Regard's,

    Gus633.

    cm2320 paper path.jpgcm2320 spring.jpgcm2320 tab.jpg
Working...