Hi. We have some problem with printer. I attached the picture from problem. I tried cleaning, but it was not better. What can i doing right now? Thanks.
IMG_4673.JPG
IMG_4673.JPG
-
-
Re: Kyocera FS-4200DN Smudge on paper
What is the repetitive interval (I can't measure from a photograph)?
I'm going to guess 29.9mm ... primary charge.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: Kyocera FS-4200DN Smudge on paper
Stawiam na pcrComment
-
Re: Kyocera FS-4200DN Smudge on paper
Please measure be for randomly swapping in parts. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Kyocera FS-4200DN Smudge on paper
Dude...looks like the Teflon is torn on the fuser. Have you looked at this?Comment
-
Comment
-
Re: Kyocera FS-4200DN Smudge on paper
replace the transfer roller. Above techs are how I feel about it. if you fold your paper from one mark to the next you will see the diameter of the roller you are dealing with. There are way too many marks to be the fuser, I have had the same problem, tried cleaning the charge roller did not resolve, even though it looked perfectly clean and fine. I changed it out anyway and it resolved itComment
Comment