Kyocera P6130CDN toner ponding to black drum surface

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Waylon
    Technician
    • Sep 2010
    • 26
    #1

    Kyocera P6130CDN toner ponding to black drum surface

    This color machine has repeatedly had calls where toner has bonded to the drum in dotted streaks has not happened on any other color, just the black. in the attached picture the toner is stuck to the drum,it will not wipe off. we have put 4 drums in the machine in the last 4 or 5 months and they have typically only ran a few hundred copies between replacements. any suggestions?
    P6130CDN toner stuck to drum.jpg
    Tags: black, color, drum, toner
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22699
      #2
      Re: Kyocera P6130CDN toner ponding to black drum surface

      There have been 5 revisions to this cleaning unit, the latest: 302NR93014 does not entirely solve the issue, but it's an improvement. I think that you'll find that paraffin lamp oil cuts the buildup, but is not good for the drum blade, so you have to separate the drum and blade when cleaning, then rinse with alcohol to cut the oily residue.

      It's not really worth all the effort. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • ntbann
          Senior Tech

          500+ Posts
          • Jan 2012
          • 612
          #3
          Re: Kyocera P6130CDN toner ponding to black drum surface

          Ive just been using alcohol.

            Comment

            • Waylon
              Technician
              • Sep 2010
              • 26
              #4
              Re: Kyocera P6130CDN toner ponding to black drum surface

              Originally posted by ntbann
              Ive just been using alcohol.
              I should add that another symptom is the charge roller sticking to the drum and when you force the rotation the photoconductive coating on the drum will come off leaving the bare core for toner to stick too.

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22699
                  #5
                  Re: Kyocera P6130CDN toner ponding to black drum surface

                  Originally posted by Waylon
                  I should add that another symptom is the charge roller sticking to the drum and when you force the rotation the photoconductive coating on the drum will come off leaving the bare core for toner to stick too.
                  I've noticed those bare areas of the charge roller without skin, but did not connect it to the drum cleaning issue. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    Previous template Next
                    Working...