kyocera p3150 image quality

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tmw
    Trusted Tech

    100+ Posts
    • Dec 2013
    • 222

    kyocera p3150 image quality

    The attachments will show blooms of toner marks under vertical lines and text randomly down the page. This was put in new at the beginning of Jan. and has just over 80,000 pages. I cleaned dust from the whole paper path, took out &amp; cleaned transfer roller and static teeth. Cleaned excess dust from around drum blade. Cleaned charge roller &amp; all contacts. Tried different settings up and down for mc roller, transfer roller, and density. I can't tell if the image diagrams in the book address this specifically, I followed the suggestions of the ones that might be related.&nbsp;<br>I don't know if this is connected to the fuser problem it had in the beginning. They had it a couple weeks and the pressure roller got coated in toner build up. Clean it off and it would come back in a week &amp; 1/2. Replaced it under warrantee and it doesn't seem to build up like before. There were only a couple specks on it this time but I should have expected none.<br>I will end up calling kyocera too, but collective knowledge is nice as well.<br>Thank you<br>OK, my images refuse to upload. You can read this &amp; my colleague will try to put them up.
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22696

    #2
    Re: kyocera p3150 image quality

    Maybe knock-off toner? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • tmw
      Trusted Tech

      100+ Posts
      • Dec 2013
      • 222

      #3
      Re: kyocera p3150 image quality

      It is oem toner. We won't use anything else for these.

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22696

        #4
        Re: kyocera p3150 image quality

        I've seen this before, but don't remember what I did. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

        Comment

        • spw
          Technician

          50+ Posts
          • Mar 2015
          • 62

          #5
          Re: kyocera p3150 image quality

          Couldn't see any of the attachments?

          I see you had a similar if not the same problem a while back. Here> ecosys p3150 pressure roller build up

          Did any of this work for you with the settings?

          we tried this and it worked for us.

          Hope it helps!

          Comment

          Working...