FYI KM 8030/6030 Exit Jams

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Raymondd
    Service Manager

    100+ Posts
    • Jan 2008
    • 108
    #1

    FYI KM 8030/6030 Exit Jams

    I have had 2 8030s in the last month give jamming issues here is the cause...Mainly jam 81. The pic is terrible maybe I can explain

    The metal plate that is circled has a small piece of sponge I guess for noise reduction, well the sponge deteriorates after time but the glue doesn't.

    The solenoid isn't strong enough to open the exit guide.
    Clean the glue off problem solved.

    Hope this helps!
    Ray
    Attached Files
    Tags: 603, 6030, exit, jam, jams, km 8030, pads, ratio, time
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22845
      #2
      I'll keep my eyes open for that one. Thanks Raymondd.
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Hose1cook
          Defective Technician

          50+ Posts
          • Jun 2008
          • 80
          #3
          There is a QA on this, they changed the material the pad is made from, I've changed the pads on all my machines.

            Comment

            • academy1st
              #4
              Re: FYI KM 8030/6030 Exit Jams

              This just saved me a lot of time and frustration. Thank you so much!

                Comment

                Previous template Next
                Working...