Kyocera FS 8100DN error 7913:0025097

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Nelo
    • Dec 2024

    Kyocera FS 8100DN error 7913:0025097

    Kyocera FS 8100 DN having the error 7913:0025097, replaced every consumables and did basic reset "switch off and then on" error still remain. Kindly need assistance on this error, what does it relate to?
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22694

    #2
    Re: Kyocera FS 8100DN error 7913:0025097

    Two questions:
    1) Why are you replacing all the consumables at 25,097 prints?
    2) Have you looked up the 7913 error code in the service manual?

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9919

      #3
      Re: Kyocera FS 8100DN error 7913:0025097

      This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

      Comment

      • Nelo

        #4
        Re: Kyocera FS 8100DN error 7913:0025097

        Originally posted by blackcat4866
        Two questions:
        1) Why are you replacing all the consumables at 25,097 prints?
        2) Have you looked up the 7913 error code in the service manual?

        =^..^=
        I dont have a service manual and suspecting faulty consumables I replaced them to see if the error would go off. Im like confused and not sure witch section the error might relate to.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22694

          #5
          Re: Kyocera FS 8100DN error 7913:0025097

          You wouldn't be confused if you read the service manual.
          I don't read manuals to people who are perfectly able to read, or are too lazy to read.

          You probably spent $600 on unnecessary parts to save the cost of a $12.77 manual.

          Please read the manual. Please try something. Then please ask for help only then. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

          Comment

          • JR2ALTA
            Service Manager

            Site Contributor
            1,000+ Posts
            • Feb 2010
            • 2016

            #6
            Re: Kyocera FS 8100DN error 7913:0025097

            I wont pile on, other than to say it's a FS-C8100dn.

            Your code is for the Magenta Developer unit.

            Replace M dev. unit or Engine Board.

            Comment

            • Forest K
              Junior Member
              • May 2019
              • 1

              #7
              Re: Kyocera FS 8100DN error 7913:0025097

              Originally posted by blackcat4866
              You wouldn't be confused if you read the service manual.
              I don't read manuals to people who are perfectly able to read, or are too lazy to read.

              You probably spent $600 on unnecessary parts to save the cost of a $12.77 manual.

              Please read the manual. Please try something. Then please ask for help only then. =^..^=
              Didn't mean to like OR thank you for the post!! If YOU had looked at the error, you would have seen its for magenta dv unit.

              Comment

              • CWP
                Trusted Tech

                100+ Posts
                • Jun 2013
                • 168

                #8
                Re: Kyocera FS 8100DN error 7913:0025097

                Originally posted by Forest K
                Didn't mean to like OR thank you for the post!! If YOU had looked at the error, you would have seen its for magenta dv unit.
                You are seriously going to blast someone for a (valid) reply to a post almost 11 years ago? That's brilliant!

                Comment

                • ntbann
                  Senior Tech

                  500+ Posts
                  • Jan 2012
                  • 612

                  #9
                  Re: Kyocera FS 8100DN error 7913:0025097

                  Originally posted by Forest K
                  Didn't mean to like OR thank you for the post!! If YOU had looked at the error, you would have seen its for magenta dv unit.
                  And Black Cat no less! He is probably the most knowledgeable person on here! You should be black listed. Everyone remember Forest K. No help for him!

                  Comment

                  Working...