Lexmark XC2326 turn off scan transmission log

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copier tech
    Field Supervisor

    5,000+ Posts
    • Jan 2014
    • 8101

    #1

    [Misc] Lexmark XC2326 turn off scan transmission log

    Hi all,

    Does anyone know how to turn off the scan log on these little devices ?

    I have one that even with the scan transmission log set to 'do not print' it will still print a log even if the email was sent successfully.

    My client is getting angry as it is wasting paper!




    Attached Files
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk

  • dalewb74
    Service Manager

    Site Contributor
    1,000+ Posts
    • Feb 2018
    • 1111

    #2
    if you turned it off in the settings after you setup the actual user. that could be why it is still printing. now that you have it turned off and set as default. go back and delete the user. then create them again as new. or make sure you go under that users settings and turn it off.

    Comment

    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 8101

      #3
      Originally posted by dalewb74
      if you turned it off in the settings after you setup the actual user. that could be why it is still printing. now that you have it turned off and set as default. go back and delete the user. then create them again as new. or make sure you go under that users settings and turn it off.
      Thank you for your prompt reply. That was is, there's a shortcut setting for each user. 😎
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk

      Comment

      Working...