[Error Code] Lexmark T652n Error 81 Routine Maintenance Replace Kit

[alsid]

Hello,
I have an issue with a device Lexmark T652n, it gives an error 81 Routine Maintenance Replace Kit now. I performed the reset entering on Configuration Mode and the value of Maintenance Kit is 0 but when the device get ready the message appears again. Sounds weired, I can print from Configuration Mode but not on Ready Mode. Anyway I thought that a firmware will fix my problem but when tried to perform an upgrade from web or USB, the device doesn't receive the firmware.
Is there any way how to clear the error or how to perform an upgrade?
Thanks for any help.
Regards.

[mloudy]

Re: Lexmark T652n Error 81 Routine Maintenance Replace Kit

Did you actually replace the kit or just reset the counter?

I am not familiar with this model but on some of the older Lexmark models the fuser had to be replace to get the maintenance message to go away.

[alsid]

Re: Lexmark T652n Error 81 Routine Maintenance Replace Kit

Did you actually replace the kit or just reset the counter?

I am not familiar with this model but on some of the older Lexmark models the fuser had to be replace to get the maintenance message to go away.

Thanks for your reply, no I didn't replace the kit just reset the counter. The fuser is in good condition it doesn't affect to the print quality when I print from Configuration Menu. Any idea what might be or how to reset without changing the fuser. Thanks again for your reply.

[dalewb74]

Re: Lexmark T652n Error 81 Routine Maintenance Replace Kit

use it for target practice.... buy a new printer.. its ancient.