If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
how can be reset drum units transfer belt maintanence kits etc on ricoh spc 420
regards
It can't be reset in service mode. You would need reset chips to reset the replace drum counter or other parts on that unit. Even if you could find those chips (I've seen them sold on ebay) ....probably not worth it. Those drums go 50,000 copies and need to be replaced at that mileage interval for good color output. The transfer belt unit goes 100,000 pages and only costs about $160 to replace.
sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
Comment