MP 9000 Ricoh

[info@digitaalprint.be]

Machine has gone on standby during a run.
She stays that way. no further response from the machine.
All power boards replaced and no result.
Anyone have an idea? thanks

Patrick

[eccelobo]

Re: MP 9000 Ricoh

Check the fuser thermostats for continuity.
Also, check the drum potential sensor for dust or bad connection.
Good luck!

Enviado desde mi SM-G920V mediante Tapatalk

[info@digitaalprint.be]

Re: MP 9000 Ricoh

Everything changed with a machine that works and no results. Thanks anyway.
Patrick

[keithxxiii]

Re: MP 9000 Ricoh

There's firmware that fixes this issue.

System_Copy firmware ver 3.01.1 or later
LCDC firmware ver 1.11 or later (Language firmware ver 0.71 or later)
Printer firmware ver 1.26 or later
Websys firmware ver 1.08 or later
WebUapl firmware ver 1.06 or later
Scanner firmware ver 1.13 or later

[anothertech]

Re: MP 9000 Ricoh

Everything changed with a machine that works and no results. Thanks anyway.
Patrick

What does that statement even mean?

[slimslob]

Re: MP 9000 Ricoh

What does that statement even mean?

He swapped parts with another machine.

[info@digitaalprint.be]

Re: MP 9000 Ricoh

Wire from the toner pump was short-circuited with the mass.