[Jamming] Sp5300 exit jams

[dchirnitch]

Exit jams going up to exit area, from fuser rollers turning, but can't check sensors in output mode??

Sent from my SM-G950U using Tapatalk

[slimslob]

Re: Sp5300 exit jams

Exit jams going up to exit area, from fuser rollers turning, but can't check sensors in output mode??

Sent from my SM-G950U using Tapatalk

Nice picture. One from a different angle might be better. Then we could be sure if that is an accordion fold I see.

Now can you provide the actual jam number. That is what tell us where it jammed and whether it is a lead edge jam or a trail edge jam.

[dchirnitch]

Re: Sp5300 exit jams

Turned out to be a dirty reg sensor just past the drum..

Sent from my SM-G950U using Tapatalk