[Misc] Ricoh MP C400 - Intermediate Transfer Unit is not set correctly

[Guest]

Hi folks, I'm getting this error when I start up the Ricoh MP C400 - "Intermediate Transfer Unit is not set correctly". I have another printer from which I tried to replace the unit but I am still getting this error. Any ideas on how to get rid of this error.

Thank you

[GIUBOSS]

Re: Ricoh MP C400 - Intermediate Transfer Unit is not set correctly

Hi folks, I'm getting this error when I start up the Ricoh MP C400 - "Intermediate Transfer Unit is not set correctly". I have another printer from which I tried to replace the unit but I am still getting this error. Any ideas on how to get rid of this error.

Thank you

would you like to say that you have tried another transfer unit taken from a working machine and it is not the same? Have you checked the attachment points and the connector if it is positioned correctly? Have you also tried to reset the PM?

[Marwanalhajbi]

Re: Ricoh MP C400 - Intermediate Transfer Unit is not set correctly

Hi folks, I'm getting this error when I start up the Ricoh MP C400 - "Intermediate Transfer Unit is not set correctly". I have another printer from which I tried to replace the unit but I am still getting this error. Any ideas on how to get rid of this error.

Thank you

try to proceed point to point and check if a cable loose,also check inside the machine if a piece of paper is locking the chip