Perfect binder GB 5010 SC 754-15

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bojans
    Service Manager

    Site Contributor
    1,000+ Posts
    • Feb 2008
    • 1313

    Perfect binder GB 5010 SC 754-15

    Hello,

    Does anyone have experience with this GB5010?
    It was working, and after jam and force open front door it showed SC754-16.
    I checked sensor and solenoid, everything is ok and working.
    Now it has SC 754-15 and seems that problem is in master control board, but we don't have spare board to check. Anyone had this error before?

    thank you
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 35064

    #2
    Re: Perfect binder GB 5010 SC 754-15

    What production model is the GB 5010 connected to?

    Comment

    • bojans
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2008
      • 1313

      #3
      Re: Perfect binder GB 5010 SC 754-15

      Originally posted by slimslob
      What production model is the GB 5010 connected to?
      Pro C 7100x

      Comment

      • slimslob
        Retired

        Site Contributor
        25,000+ Posts
        • May 2013
        • 35064

        #4
        Re: Perfect binder GB 5010 SC 754-15

        SC 754-15 Perfect Binder: Front door lock release error
        The front door lock release sensor did not go ON, even though the door was unlocked.
        Front door lock solenoid defective
        Front door lock release sensor defective
        Connector loose, broken, defective
        You apparently damaged something when you forced the door open.

        Comment

        • JaysOnTheEDGE
          Technician

          50+ Posts
          • Jul 2016
          • 60

          #5
          Re: Perfect binder GB 5010 SC 754-15

          Did you come up with a resolution yet? Have a few of these in field, not much goes wring with them but always looking to learn about them whenever I can.

          Comment

          • bojans
            Service Manager

            Site Contributor
            1,000+ Posts
            • Feb 2008
            • 1313

            #6
            Re: Perfect binder GB 5010 SC 754-15

            Unfotunatelly, I didn't. Sold 7100 that it was attached to,so I left it in garage until get new machine.

            Comment

            Working...