grainy printing on Ricoh SP 5300DN

[Walter1982]

Hello

Does anyone know which roller I need to clean to fix this? I have wiped down all the rollers with rubbing alcohol using a microfiber towel but it keeps printing grainy.

grainy.JPG

[8T2]

Re: grainy printing on Ricoh SP 5300DN

That looks like fuser unit to me or possibly cleaning blade. Toner build up should be visible on the fusing sleeve/hot roller (dont recall which those use)

Sent from my WAS-LX1 using Tapatalk

[slimslob]

Re: grainy printing on Ricoh SP 5300DN

Could be a dirty cleaning blade or charge roller. If you have already cleaned the charge roller with rubbing alcohol, you will need to replace it as any type of alcohol dry out and damage rubber and synthetic rollers. Charge rollers should only be cleaned with a cotton cloth dampened only with water.

[Walter1982]

Re: grainy printing on Ricoh SP 5300DN

Could be a dirty cleaning blade or charge roller. If you have already cleaned the charge roller with rubbing alcohol, you will need to replace it as any type of alcohol dry out and damage rubber and synthetic rollers. Charge rollers should only be cleaned with a cotton cloth dampened only with water.

can you please tell me which one is the charge roller? is it the one i'm holding by any chance?

charge.JPG

[anothertech]

Re: grainy printing on Ricoh SP 5300DN

can you please tell me which one is the charge roller? is it the one i'm holding by any chance?

[ATTACH=CONFIG]49877[/ATTACH]

Copier maintenance is not that easy. You really need a trained tech on site.

[Walter1982]

Re: grainy printing on Ricoh SP 5300DN

Could be a dirty cleaning blade or charge roller. If you have already cleaned the charge roller with rubbing alcohol, you will need to replace it as any type of alcohol dry out and damage rubber and synthetic rollers. Charge rollers should only be cleaned with a cotton cloth dampened only with water.

You were correct, it was the charge roller. I cleaned it with water and everything is printing quite nice. Hopefully the rubbing alcohol didn't have much of an impact.

[Walter1982]

Re: grainy printing on Ricoh SP 5300DN

Copier maintenance is not that easy. You really need a trained tech on site.

I've actually had quite a bit of success in cleaning and maintaining my 2 Ricoh printers. (Aficio MP 2352 and SP 5300 DN). I have a printer maintenance guy who comes a few times a year to fix major issues such as replacing the fuser, and I always ask him lots of questions and watch him carefully as he takes apart these machines and I've learned a lot simply thru observation. Simple things like cleaning rollers to make sure pages are printing perfectly isn't a very complex process. I also have a network guy who helps me set up my "scan to FTP" on the Ricoh Aficio. I have tried setting it up myself in the past but have been unsuccessful. This forum is great and thank you for your replies!

[Maged_elagamy]

Re: grainy printing on Ricoh SP 5300DN

Hello

Does anyone know which roller I need to clean to fix this? I have wiped down all the rollers with rubbing alcohol using a microfiber towel but it keeps printing grainy.

[ATTACH=CONFIG]49873[/ATTACH]

try cleaning charge roller with only water not alcohol

[slimslob]

Re: grainy printing on Ricoh SP 5300DN

try cleaning charge roller with only water not alcohol

A little late to the game. He already did that a month and a half ago.

[Maged_elagamy]

Re: grainy printing on Ricoh SP 5300DN

A little late to the game. He already did that a month and a half ago.

Thanks
I can see that