ricoh pro 8002

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Luther
    Senior Tech

    500+ Posts
    • May 2006
    • 682
    #1

    ricoh pro 8002

    I could use a little help with a code i am getting on this machine, sc 513-01, have very little experience with ricoh and just need a nudge in the general direction, have the manual but not clear if its in the feed unit, any help appreciated
    Tags: direction, general, manual, nudge, ricoh
    • mga
      Copier Technician

      Site Contributor
      1,000+ Posts
      • Dec 2010
      • 1393
      #2
      Re: ricoh pro 8002

      Originally posted by Luther
      I could use a little help with a code i am getting on this machine, sc 513-01, have very little experience with ricoh and just need a nudge in the general direction, have the manual but not clear if its in the feed unit, any help appreciated
      Pro 8002 you sure of the model
      Regards Mark

      FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

      RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

      https://copierservices.simdif.com

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 34793
          #3
          Re: ricoh pro 8002

          If you are not trained on Ricoh production machines, you should not be working on them. The Service Call description tells you exactly what unit is malfunctioning and Replacements and Adjustments show you where that unit is located. Oh BTW, I am retired and have never worked on a Pro 8200 but I do know how to use a service manual.

            Comment

            • Luther
              Senior Tech

              500+ Posts
              • May 2006
              • 682
              #4
              Re: ricoh pro 8002

              Sorry it was the pro8200ex, but it is rebadged as a Kyocera 13600, I replaced the DRB and the motor and all is good

                Comment

                Previous template Next
                Working...