Ricoh MP201

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • QR Rebecca
    Junior Member
    • Nov 2021
    • 2
    #1

    [Error Code] Ricoh MP201

    Good morning to all.
    I would appreciate his help.
    I have a problem with a Ricoh Mp201. There was a noise on the right door on the side of the fuser and it turned out to be the transfer roller gear. While testing, I closed and opened the door several times and one of those times I marked "remove the paper from the ADF" followed by "Error SC320 "
    According to the manual I must change the polygonal laser motor and / or the BICU.
    What would cause this failure, if it was okay at the time of checking?
    Thanks in advance.
    Tags: door, error, mp201, ricoh, times
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 34796
      #2
      Re: Ricoh MP201

      Very common. Toner has built up in the bushings of the PTR and is causing it to not turn freely. As a result the teeth on the drive gear are jumping against the gear on the drum. Clean or replace the PTR.

        Comment

        • GIUBOSS
          Service Manager

          Site Contributor
          1,000+ Posts
          • Jul 2013
          • 1318
          #3
          Re: Ricoh MP201

          Originally posted by QR Rebecca
          Good morning to all.
          I would appreciate his help.
          I have a problem with a Ricoh Mp201. There was a noise on the right door on the side of the fuser and it turned out to be the transfer roller gear. While testing, I closed and opened the door several times and one of those times I marked "remove the paper from the ADF" followed by "Error SC320 "
          According to the manual I must change the polygonal laser motor and / or the BICU.
          What would cause this failure, if it was okay at the time of checking?
          Thanks in advance.
          Sc320 if I'm not mistaken when removing the toner housing it can give this code but sometimes even the motor with polygon mirror can fail.

            Comment

            • QR Rebecca
              Junior Member
              • Nov 2021
              • 2
              #4
              Re: Ricoh MP201

              Thank you very much, I will take your comments into account.

                Comment

                Previous template Next
                Working...