RICOH MP7502/6502 "custom size paper" on Tray 2/3

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jma676
    Expert Tech
    250+ Posts
    • Mar 2009
    • 324

    RICOH MP7502/6502 "custom size paper" on Tray 2/3


    Hello everyone, I bring you a simple inquiry about the
    RICOH MP7502/6502 etc: How to enable "custom size paper" setting on TRAY 2 and 3.

    By default only Bypass tray is enabled for this, but i know that is posible to activate in 2 and 3 Trays.

    THKs
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 34944

    #2
    Re: RICOH MP7502/6502 "custom size paper" on Tray 2/3

    Default: [Auto Detect]
    You can specify a custom size of between 139.7 - 330.2 mm (5.50 - 13.00 inch) vertically, and between 139.7 - 487.7 mm (5.50 - 19.20 inch) horizontally.
    For details about auto detectable paper sizes, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.

    You must first turn off Auto Detect in User Tools.

    Comment

    • jma676
      Expert Tech
      250+ Posts
      • Mar 2009
      • 324

      #3
      Re: RICOH MP7502/6502 "custom size paper" on Tray 2/3

      OK, THKs.

      Comment

      Working...