RICOH MP7502/6502 "custom size paper" on Tray 2/3

[jma676]

Re: RICOH MP7502/6502 "custom size paper" on Tray 2/3

OK, THKs.

[slimslob]

Re: RICOH MP7502/6502 "custom size paper" on Tray 2/3

Default: [Auto Detect]
You can specify a custom size of between 139.7 - 330.2 mm (5.50 - 13.00 inch) vertically, and between 139.7 - 487.7 mm (5.50 - 19.20 inch) horizontally.
For details about auto detectable paper sizes, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.

You must first turn off Auto Detect in User Tools.

[jma676]

Hello everyone, I bring you a simple inquiry about the RICOH MP7502/6502 etc: How to enable "custom size paper" setting on TRAY 2 and 3.

By default only Bypass tray is enabled for this, but i know that is posible to activate in 2 and 3 Trays.

THKs