display shows left door open when closed. Front door switches check good. Possible causes????
Thanks!!!
Thanks!!!
-
-
we had the same problem on a mpc6000 and we spent three days to solve the problem (change of power pcb, switch, etc...)
The cause was a very small disconnection of two boards. try to ensure that all the boards are well interconnected.
Good luck. -
[QUOTE=h.tiberghien;188953]we had the same problem on a mpc6000 and we spent three days to solve the problem (change of power pcb, switch, etc...)
The cause was a very small disconnection of two boards. try to ensure that all the boards are well interconnected.
Good luck.Comment
Comment