Ricoh SP3410SF firmware update problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Doganays
    • Oct 2024
    #1

    [Error Code] Ricoh SP3410SF firmware update problem

    Ricoh SP3410SF firmware uptade problem

    We have recently updated to version v2.05 from v1.58. Watching the device display "initializing" writes. The device does not make any process. USB port and an Ethernet port can not access the printer. We can not get the service menu. clear 1-0-7 start not working.

    We want technical support. Please could you help.
    Tags: None
    • Cipher
      It's not easy being green

      1,000+ Posts
      • May 2006
      • 1309
      #2
      Re: Ricoh SP3410SF firmware update problem

      The older engine PCB has v1.xx firmware installed.
      (Not compatible with v2.xx engine firmware).

      The newer engine PCB has v2.xx firmware installed.
      (Not compatible with v1.xx engine firmware).

      You would have to replace the engine PCB if you flashed the wrong engine version by mistake as the machine will not initialize / startup.
      • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

      Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

        Comment

        • Doganays
          #3
          Re: Ricoh SP3410SF firmware update problem

          Originally posted by Cipher
          The older engine PCB has v1.xx firmware installed.
          (Not compatible with v2.xx engine firmware).

          The newer engine PCB has v2.xx firmware installed.
          (Not compatible with v1.xx engine firmware).

          You would have to replace the engine PCB if you flashed the wrong engine version by mistake as the machine will not initialize / startup.
          Pcb card solution For me To Change no.
          Where I can buy Pcb card ?

            Comment

            Previous template Next
            Working...